Verify The Shipment; Installing A 19-Inch Rack Mount Kit (Optional) - IBM System Storage TS2250 Setup, Operator, And Service Manual

Verify the Shipment

|

Installing a 19-inch rack mount kit (optional)

2-2
TS2250 Tape Drive Setup, Operator and Service manual
1. Inspect the unit for shipping damage. If there is damage, do not install the unit.
Report the damage immediately by contacting your place of purchase.
2. Locate the label on the rear panel of the unit with the machine type, model
number, and serial number of the unit. Make a note of these numbers and store
them in an easily accessible place. Should you need to contact Technical
Support, you will be asked for these numbers.
Ensure that the following items are included in the shipment:
v Power cord (For the appropriate cord for your country or region, see
Appendix C, "Ordering Optional Features, Replacement Parts, Power Cords, and
Media," on page C-1.)
v IBM LTO Ultrium Cleaning Cartridge
v Single-connector SAS wrap tool
v Optional Rack Mount Kit
v The IBM System Storage TS2250 Tape Drive Quick Reference (GC27-2276-01)
v The IBM System Storage TS2250 Tape Drive Setup, Operator and Service Guide
GC27-2275-01 (this guide)
v Documentation CD (includes library documentation, translated safety
information, and translated warranty information
v SAS or USB cables are not part of the ship group. They must be ordered
separately.
Important: Before installing the rack shelf, read the information on rack safety. See
"Rack safety" on page xvi
Before you begin, read these instructions to familiarize yourself with the
installation procedure.
Verify Kit Contents
Qty Description
1 fixed shelf
4 screws
2 tie wraps
1 PDU line cord
Installation Instructions (Feature 7003)
Tools Required
v 7 mm nut driver or 7 mm socket wrench
Installing a 19-inch rack shelf
1. Decide at what level you want to install the shelf. The drive requires 3 units
(EIAs) of rack space (see 2 in Figure 2-1 on page 2-3).