Appendix B. Tapealert Flags - IBM System Storage TS2240 Tape Drive Setup, Operator, And Service Manual

Appendix B. TapeAlert flags

TapeAlert is a patented technology and standard of the American National
Standards Institute (ANSI) that defines conditions and problems that are
experienced by tape drives. The technology enables a server to read TapeAlert
flags from a tape drive through the SAS interface. The server reads the flags from
Log Sense Page 0x2E. Refer to the IBM LTO Ultrium Tape Drive SCSI Reference
for the list of TapeAlert flags that are supported by this tape drive.
© Copyright IBM Corp. 2007
B-1