Sony LMD-X3200MD Manual page 31

Output
3G-SDI output connector
BNC type (1)
Active-through
12G-SDI output connector
BNC type (1)
Active-through
CLONE output connector
BNC type (1)
DC 5V OUT Round type pin (female) (1)
DC 12V OUT Round type pin (female) (1)
General
Power AC IN: 100 V - 240 V, 50/60 Hz,
1.7 A - 0.8 A
DC IN: 26 V, 5.8 A (Supplied from
AC adaptor)
Power consumption
Maximum: approx. 163 W
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Humidity 30% to 85% (no condensation
allowed)
Pressure 700 hPa to 1,060 hPa
Storage and transport conditions
Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Humidity 20% to 90% (no condensation
allowed)
Pressure 700 hPa to 1,060 hPa
Accessories supplied
AC power cord (1)
Plug holder for the supplied AC
power cord (2)
Before Using This Unit (1)
CD-ROM (including the
Instructions for Use) (1)
Service Contact List (1)
Information for Customers in
Europe (1)
Screws for the VESA mount, M4 ×
12 mm (4)
Optional accessories
AC adaptor
AC-300MD
Monitor Stand
SU-600MD
Foot Switch
FS-24
Caution
AC-300MD does not conform to the drip-proof

level of protection. Do not operate the unit in a
place exposed to liquids, such as a floor in a
surgical operating room.
The FS-24 has an Ingress Protection rating of

IPX3. Therefore, do not operate it environments
exposed to splashing liquids (e.g., surgical
operating rooms).
For safety, use a device with a rating of IPX6 or
higher when operating in such environments.
Medical Specifications
Protection against electric shock:
Class I
Protection against dust penetration and
harmful ingress of water:
Only the front side (symbol:
Other sides (symbol:
(Only when all the cable covers are
attached)
Degree of safety in the presence of a
flammable anesthetic mixture with air or
with oxygen or nitrous oxide:
Not suitable for use in the presence of a
flammable anesthetic mixture with air or
with oxygen or nitrous oxide
Mode of operation:
Continuous
Design and specifications are subject to change
without notice.
Notes
Always verify that the unit is operating

properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF

ANY KIND MADE BY USERS OF THIS UNIT OR
MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE

TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT THAT
MAY RESULT DUE TO CIRCUMSTANCES OF
ANY KIND.
) IP41
) IP31
15
GB
Specifications