Removing The Mirror Frame; Removing The Control Box - Barco BARON 908 Installation Manual

Moving the Baron through a doorway

Removing the mirror frame

1 Loosen the 10 bolts inside the mirror cabinet.
2 Remove the mirror frame.
image B.3
Removing the mirror frame

Removing the control box

1 Disconnect the color marked cables from the control unit (when necessary remove cable straps) and put them out of the
control box.
2 Loosen the 4 bolts and remove the control box.
image B.4
Removing the control box
Remark:
When finished repeat the procedures above in the reverse order.
Warning: Be sure to respect the color labels when reconnecting the cables to the control unit, mechanical damage
may occur when connecting cables with different color labels.
Tilt the mirror cabinet back in its initial horizontal position.
B - 2
764
(30.08)
5976418 BARON 908 04122001