Moving the Baron through a doorway
B
MOVING THE BARON THROUGH A DOORWAY
Remark:
We assume the Baron is in initial state as delivered: disassembled (projector+cover and screen assembly removed) and
tilted horizontal.
Tilting the mirror cabinet in its vertical position
1
Loosen the 2 screws and remove the protection plate of the control box (image B.1).
2
Connect the 8 pin connector of the local controller to the control unit (image B.1).
3
Plug the power cord of the power strip to a wall outlet (image B.1).
Control box
Vacuum pump
image B.1
Local controller to control unit
4
Warning: The stop switches preventing that the mirror cabinet exceeds its tilting/lifting limits will not work!!!
Keep this in mind when tilting the projector in the vertical position.
5
Use the keys on the local controller to tilt the mirror cabinet in a vertical position (image B.2).
6
Unplug the power cord from the wall outlet.
image B.2
Tilting the projection table with the local controler
5976418 BARON 908 04122001
8 pins to
control unit
Control unit
Local controller
Power strip
Power strip
to wall outlet
B - 1