Table of Contents
Advertisement
Attaching the screen to the mirror cabinet
1
Turn in 2 fixation hand bolts (image 4.5) on the front of the projector (image 4.5).
2
Loosen the locks (described above) and rotate the projector (image 4.5), this makes it easier to turn in the fixation hand bolt on
the top side of the screen (image 4.5).
3
Rotate the projector back in its correct position until the locks jump in their position.
3x
image 4.5
Attaching the screen
Mounting the projector cover
1
Put the black cover on the projector (image 4.6).
2
Secure it with 2 bolts on each side (image 4.6).
image 4.6
Mounting the projector cover
Disassembling the baron
To disassemble the baron repeat the procedures above in the reverse order.
Screen protection
When the Baron is not in use the screen can be protected by pulling down the screen cover (image 4.7).
image 4.7
Protection screen
5976418 BARON 908 04122001
Installation setup
4 - 3
Advertisement
Table of Contents
