Table of Contents
Advertisement
Installation setup
Securing the correct position of the projector
1
Loosen the 2 bolts (these can be damaged while removing due to the weight of the projector) and remove the supports (image
4.3).
2
Secure the correct projector position by rotating the projector a little to the front and to the back until the locks jump in their position
(image 4.3).
3
Remove the 3 lens covers.
image 4.3
Securing the correct position of the projector
Mounting the screen
Putting the screen on the mirror cabinet
1
On the backside of the screen is a hose, this will be connected to the hose inside the mirror cabinet (image 4.4).
2
Put the screen assembly (With the Barco logo pointing away from the projector) on the mirror cabinet in a way you still can connect
the hose (image 4.4).
3
When this is done, put the screen in the correct position, covering the mirror cabinet.
image 4.4
Putting the screen on the mirror cabinet
4 - 2
5976418 BARON 908 04122001
Advertisement
Table of Contents
