Table of Contents
Advertisement
RS232 Connection
RS232 input and RS232 output of the projector
The projector is equipped with a RS232 port that allows them to communicate with a computer.
Applications
a) remote control:
- easy adjustment of the projector via a computer.
- allow storage of multiple projector configurations and set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications:
- sending data to the projector or copying the data from the projector to a hard memory device.
Set up of the baud rate for communication with a computer
See 'Changing the baud rate' in chapter 'Service mode'.
image 2.10
RS232 Connection
Communication port for communication with peripherals
Connecting a RCVDS 05 switcher to the projector
-
Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher (R9827880) and up to 90 inputs when 10 RCVDS
switchers are linked via the 5-cable output modules.
-
Serial communication with the projector.
-
Remote control buttons on the RCVDS to control the projector (source selection and analog settings)
-
The selected source number will be displayed on a 2 digit display and the selected input modules will be indicated with a LED
on the rear.
image 2.11
Communication port
5976418 BARON 908 04122001
Computer
to computer
RCVDS 05 switcher
(R9827880)
Source connections
Port on projector
RS 232 OUT
RS 232 IN
Port on projector
800 periphals
COMM. PORT
6 - 7
Advertisement
Table of Contents
