Table of Contents
Advertisement
Source connections
RGB Analog source with composite sync to port 4/5
Which signal to port 4/5 ?
RGB analog input terminals with separate H and V sync inputs, composite sync input or with sync on green (BNC terminals). The
projector detects automatically where the sync signal is located.
Always use an interface (e.g. Barco Magik Interface 9828120) when a computer and local monitor have to be connected to the projector
as the signal cable coming from the computer is limited to 60 cm due to interferences.
The RGB analog input accepts only sources with a horizontal frequency of 32 kHz and higher.
The Baron is installed with a decoder + Limo Pro to connect sources with horizontal frequency lower than 32 kHz.
RGBS or RGsB Input selection
With the RCU, press digit button 4 or 5, 4 when sync on green, 5 when separate sync.
image 6.9
Port 4/5
Component video source to port 4/5
Which signal to port 4/5 ?
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance (Y) input (BNC terminals). The projector detects
automatically where the sync signal is located.
Always use an interface (e.g. Barco Magik Interface 9828120) when a computer and local monitor have to be connected to the projector
as the signal cable coming from the computer is limited to 60 cm due to interferences.
Component video input selection
With the RCU, press digit button 6
RGB Analog source with tri level sync to port 4/5 (option)
Which signal to port 4/5 ?
RGB analog input terminals with tri level sync input or with tri level sync on green (BNC terminals). The projector detects automatically
where the sync signal is located.
This feature requires a optional tri level sync module (Order number: R9828040).
RGB3S or RG3sB input selection
With the RCU, press digit button 7
Component video source with tri level sync to port 4/5 (option)
Which signal to port 4/5 ?
Component video with tri level sync input can be connected to the projector via port 4/5. The projector detects automatically where
the sync signal is located.
This feature requires a optional tri level sync module (Order number: R9828040).
(R-Y)Y(B-Y)3S or (R-Y)Y3s(B-Y) input selection
With the RCU, press digit button 8.
6 - 6
Computer
to computer
to monitor
Magik Interface
(R9828120)
Port on projector
R
G
B
Comp / H-Sync
V-Sync
PORT 4 / 5
5976418 BARON 908 04122001
Advertisement
Table of Contents
