Waring WFP14SK Manual page 6

THE PARTS
The Waring food processor consists of the following standard parts
and accessories (see diagram on next page):
1. Motor base with vertical heavy-duty shaft
2. Two control levers
a. ON ( )
b. OFF-PULSE (
3. Safety interlock (not shown) Prevents machine from
operating until cover is in place
4. Clear work bowl with dry capacity of 14 cups
5. Clear work bowl cover with new seal system for use with larger
liquid volumes
a. Large oval-shaped feed tube for maximum use of cutting
surface
b. Large pusher with full-size and reduced-size feed options
c. Small pusher used within the large pusher for smaller
vegetables, pepperoni, etc.
Note: This combination pusher allows use of the entire
feed tube for large foods and provides controlled
processing for small-diameter foods such as carrots,
celery and pepperoni.
6. Sealed and locked S-blade (cutter blade) to chop, grind, purée
and mix: locks in place for liquid processing and easy pouring
7. a. Adjustable slicing disc (1–6mm) for WFP14SE
b. 2mm, 4/65" slicing disc for WFP14SK
8. a. Reversible shredding disc for WFP14SE
b. 4mm, 5/32" shredding disc for WFP14SK
9. Sealed and locked whipping disc
10. Detachable stem for 2mm slicing disc and 4mm shredding discs
(7a + 8a)
11. Detachable stem for use with adjustable slicing disc and
reversible shredding discs (7b + 8b)
Note that all of the accessory discs have a unique offset
removable stem. The design of this stem increases the
cutting/processing efficiency of these accessories.
)
,
6