FireplaceXtrordinair 864 TRV Deluxe Manual page 11

Conversion du foyer en aération arrière (suite)
Bend the heat shield legs
downward as shown.
Remove the screws from the
top of the fireplace. Attach
the heat shield to the top of
the fireplace using these
screws.
Travis Industries
Installation
(for qualified installers only)
Tuck the 3 pieces of insulation (included in the
rear vent conversion kit) into the area above the
exhaust manifold. The insulation must be placed
so it covers the entire area over the flue
assembly.
Attach the intake cover plate to
the top of the fireplace using the
screws removed earlier.
Attach the vent cover plate
(shipped with the fireplace) to
the back of the fireplace using
the screws removed earlier.
4161122
11
100-01387