Sterilization Mode - Whirlpool CS2320 Manual

Operation Instructions
Example: Set the baking preheating temperature to 200°C.
Steps:
1. In standby mode, turn the knob clockwise to Preheating Mode. The icon will flash. Steam is the default setting. Turn the
knob to select the baking preheating mode, and then press the knob to confirm (as shown in the diagram below).
2. The display will jump to temperature setting automatically. Turn the knob until the display shows 200°C. Press the knob to
confirm (as shown in the diagram below).
3. Setting is complete. The combi steamer will start preheating (as shown in the diagram below).
When preheating is complete, the display will show "END" and an audio tone will be heard (as shown in the diagram below).
After preheating the combi steamer, you can select other cooking modes to continue your cooking as required.
Important: The function of "Adjust or Increase the Cooking Time during/after Cooking is Completed" is not available in
this mode.
S48893-Whirlpool Combi Steamer User Manual_EN_V12.indd 74-75
74
Operation Instructions

■ Sterilization Mode

At sterilizing mode, high temperature 110°C is used to sterilize dinnerware, cutlery or feeding bottles. Always ensure that the
water tank is filled before using this mode.
Temperature
Default Setting 110℃
Setting Range Cannot be adjusted
Example: Set the cooking time to 35 minutes.
Steps:
1. In standby mode, turn the knob clockwise to Sterilization Mode. The icon will flash. Press the knob to confirm (as
shown in the diagram below). The display will jump to hour setting automatically.
2. Turn the knob to confirm the 00 hour setting (as shown in the diagram below). The display will jump to minute setting
automatically.
3. Turn the knob until the minute display shows 35. Press the knob to confirm (as shown in the diagram below).
4. Setting is complete. The combi steamer will start cooking (as shown in the diagram below).
75
Time
30 mins
5 mins - 6 hours and 59 mins
26/7/2016 下午12:55