Table of Contents
Advertisement
Malfunction
Cutlery is not dry.
Insides of the appliance
are wet after the wash
cycle.
Food residue on the
crockery.
Cause
Cutlery is not properly
placed in the cutlery basket
or drawer.
No malfunction. For
condensation drying, water
droplets in the rinse aid
container in the reservoir are
necessary and desirable. The
moisture in the air condenses
on the inner walls of the
device, flows downwards and
is pumped out.
Crockery is placed too close
together or the basket is
too full.
Spray arms cannot
rotate freely.
Spray arm nozzles are
clogged.
The seven are polluted.
The strainers are incorrectly
fitted and/or not secured.
Washing program too weak
chosen.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
TroubleshootingNL
Troubleshooting
Drops may form at the touch
points of the cutlery.
If possible, arrange the cutlery
1. "
separately from each other."→Page 32
Avoid touch points.
2.
No action required. No action
required.
Arrange the crockery with sufficient
1.
space in between.
The spray jets must be able to
reach the surface of the
dishes.
Avoid touch points.
2.
▶
Arrange the dishes in such a way
that the dishes do not hinder the
rotation of the spray arm.
▶
Clean the "spray arms"
→
Page 43.
▶
Clean the sieves.
"Cleaning sieves", Page 42
1.
Apply the sieves properly.
"Sieving System", Page 42
Secure the seven.
2.
▶
Select a more powerful rinse
programme.
"Programs", Page 18
▶
Only remove coarse food residues
and do not pre-rinse the dishes.
49
Advertisement
Table of Contents
