Set Up And Connection; Scope Of Delivery; Device; Waste Water Connection - Bosch SMS6ECW07E User Manual

Table of Contents

Advertisement

NLSet up and connect
usually shortened.
→ †Overview of the basic settings",
page 35
†Additional functions", page 20
O set up and connect
s close the appliance for correct
use in an expert manner on electricity
and water. Observe the required
criteria and the installation
instructions.
Scope of supply
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
For complaints, please contact the
store where you purchased the
device or our customer service.
Remark:The device has been checked
at the factory for correct operation.
Water stains may remain on the
device. The water stains disappear
after the first wash cycle.
The delivery consists of:
†Dishwasher
†Instructions
†Assembly instructions
†Other documents containing information
tie
†mounting material
†Salt filling aid funnel
†Power cord
†Quick guide
Set up and connect the

device

You can install your undercounter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If you
subsequently install the appliance as a
free-standing appliance, you must
12
secure the appliance against tipping
over, e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to the
adjacent cupboard
at.
Observe the safety instructions." →
1. "
Page 4
Observe the instructions for the
2. "
electrical connection."
→ Page 13
Check the contents of the package
3.
and the condition of the device.
The required installation dimensions can be found
4.
in the installation instructions.
Level the appliance using the
5.
adjustable feet.
Pay attention to a firm position.
Install the drain water connection."
6. "
→ Page 12
Install the drinking water
7. "
connection." → Page 13
Connect the device to the
8.
power.

Waste water connection

Connect the appliance to a waste water
connection so that the contaminated
washing water can be drained.
Install waste water connection
The necessary steps can be found in
1.
the supplied installation instructions.
Connect the drain hose to the
2.
connection nipple of the siphon
using the supplied parts.
Make sure that the drain hose is not
3.
kinked, crushed or tangled.

Advertisement

Table of Contents
loading

Table of Contents