Table of Contents
Advertisement
NL
Troubleshooting
s fix disruptions
k You can remedy minor faults on the device yourself. Before using
contact customer service for information on troubleshooting. This way you
avoid unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
Only qualified personnel may carry out repairs on the device.
▶
Only original spare parts may be used for repair of the device.
▶
If the power cord of this appliance is damaged, it must be replaced with a
▶
special cord available from the manufacturer or its service agent.
Device Safety
Malfunction
Appliance door does not open at
the end of the programme.
44
Cause
Automatic door opening
is not activated.
Door is not set correctly.
The appliance door and door
seal are dirty.
Wrong screws were
used to adjust the
door gap.
The safety device
disables the automatic
door opening.
Troubleshooting
▶
Activate the automatic door
opening.
"Overview of the basic
settings", page 35
▶
Set the appliance door correctly with
the aid of the installation instructions.
The door gap must be at
least 70 mm to 100 mm.
▶
Clean the appliance door and
door seal with a damp cloth
and a little washing-up liquid.
Use size 4X30 screws to
▶
adjust the door gap.
The screws are supplied as
standard.
Using screws that are too
long may disable the
automatic door opening
function.
Please contact "service".→
▶
Page 61
Advertisement
Table of Contents
