Table of Contents
Advertisement
Page 12 - Using the Handset
Using the Handset
Switching On/Off
Answering Calls
Making Calls
Last Number Redial
Locking the Keyboard
Recall
Page 12 - Switching On/Off
To switch the handset on press and hold down
switch the handset off, press
•
Signal Symbol
Indicates a base station in range and that your 20DT handset is ready
for use. If the symbol flashes the base station is busy with its maximum
number of calls.
•
Off-Hook Symbol
Shown when making calls and during conversations. Use
disconnect.
To answer an incoming call: Press
To cancel a message waiting lamp: Press ∗, 2 and
1.
Press
and then dial the number required
(prefix external calls with 9). Or
2.
Dial the number required and press
1.
To access the redial stack (up to 10 different numbers) press REDIAL.
2.
Press > until the required number appears (from newest to oldest).
3.
Press
to call the desired number.
You can lock the handset keys. This stops calls being accidentally started.
Whilst locked the handset displays KEY LOCKED. You can still answer
calls by pressing the
1.
To lock or unlock the keyboard, press MENU and then LOCK.
The R key produces a 'recall' signal and is used to Hold calls. When a call
is held, you will hear a dial tone. In addition, some PBX's may need this
'recall' signal to access specific functions.
until you hear a tone and the display clears.
.
.
key.
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 3 (25/09/2002)
until INDeX appears. To
key to
twice.
Advertisement
Table of Contents
