Paxar 9860 Operating Instructions Manual page 81

For monarch 9860; monarch 9855 label printers
Hide thumbs Also See for 9860:
Table of Contents

Advertisement

SET IP RANGE [EN/DI/ALL]
Sets the valid range of IP addresses.
SET IP REtry [EN/DI]
Enables or disables LPD retry continuation
SET IP ROuter aa.bb.cc.dd
Sets default Router/Gateway address (or access point).
SET IP SUBnet aa.bb.cc.dd
Sets default subnet mask.
SET SERVIce <servicename> IP [EN/DI]
Enables or disables TCP/IP jobs on specified service.
SET SERVIce <servicename> TCP nn
Sets TCP port number (>1023 on service).
SET IP TCP [EN/DI]
Selects whether to use the raw TCP (port 9100) protocol.
SET IP TELNET [EN/DI]
Selects whether to use the Telnet protocol.
SET IP TFTP [EN/DI]
Selects whether to use the TFTP protocol.
SET IP TImeout n
Sets timeout (n) in minutes.
SET IP WIndow nn
Sets the LPD/TCP maximum window size
Console Commands 4-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monarchnet2

Table of Contents