Table of Contents
Advertisement
To view the current wireless settings, type sh en (show wireless
4.
settings) or sh nw (show network settings) and press Enter:
WiFi Mode = INFRASTRUCTURE
WiFi SSID: ABC123
Speed = 54
International Roaming: Flexible
Dynamic Frequency Selection: Unsupported
Regulatory Domain = USI
WiFi FW Ver = 2.13.10.0 LMAC, 2.12.18.0 UMAC
AP density = LOW
Authentication type= OPEN SYSTEM
Encryption is Disabled
Local certificate loaded
AP MAC Address = 00 A0 F8 51 B4 FC
Signal Quality = Excellent (100%)
Connected to SSID ENG4121 on channel 11
5.
To show the current IP settings, type sh ip (show TCP/IP
settings) and press Enter.
IP is enabled
IP address
Subnet mask
IP Gateway
(via DHCP
192.2.2.192)
LPD banner
LPD retries are disabled Keepalive
Service
Port
PXR1E8580_X1 X1
To change the SSID, type set en ssid testsystem and press
6.
Enter.
7.
To set the IP address, type set ip ad 192.0.0.192 and press
Enter.
To set the subnet mask, type set ip sub 255.255.0.0 and
8.
press Enter.
Type INIT and press Enter to save the settings and initialize the
9.
unit.
10. Type EXIT to exit Telnet.
192.0.0.192 Boot tries
255.255.0.0 Boot method
192.1.1.192 Max window
disabled
Timeout
TCP port
9100
3
AUTO
10240
0 min
1 min
Console Commands 4-3
Advertisement
Table of Contents
Troubleshooting
