Storing Items From The Redial List Into The Speed Dialer - Panasonic KX-TS4300 Operating Instructions Manual

Speed Dialer
L To erase the character, press
{ERASE} or select "Delete
Char", then press {MENU/SET}.
9
Select "Done", then press
{MENU/SET}.
L To cancel, select "Cancel", then
press {MENU/SET}.
10
Enter (or edit) the phone number
(max. 24 digits).
L To erase the number, press
{ERASE} or select "Delete
Char", then press {MENU/SET}.
L If required, you can insert
{FLASH}, {REDIAL/PAUSE} or
{*} (TONE) in a phone number.
L To add the last number dialed, you
can press {REDIAL/PAUSE}
instead of entering the phone
number.
11
Select "Done", then press
{MENU/SET}.
L To cancel, select "Cancel", then
press {MENU/SET}.
12
Press and hold {MENU/SET} to
return to standby mode.
Note:
L To return to the previous menu, press
{<}.
Editing/correcting a mistake
Press {<} or {>} to move the cursor
to the character or number you want to
erase, then press {ERASE}. Enter the
appropriate character or number.
Storing items from the
redial list into the speed
dialer
Important:
L Make sure that the unit is in standby
mode.
1
Press {REDIAL/PAUSE}.
36
For assistance, please visit http://www.panasonic.com/phonehelp
2
Press {V} or {^} to select the
desired number, then press
{MENU/SET}.
3
Select "Copy To SPD", then press
{MENU/SET}.
4
Press the speed dial button ({1} to
{16}).
OR
Press {LOWER}, then press the
speed dial button ({1} to {16}).
3215555
Select SPD Key
5
Enter the name (max. 16 characters;
see "Character table" on page 31).
L To erase the character, press
{ERASE} or select "Delete
Char", then press {MENU/SET}.
6
Select "Done", then press
{MENU/SET}.
L To cancel, select "Cancel", then
press {MENU/SET}.
7
Edit the phone number if necessary.
L To erase the number, press
{ERASE} or select "Delete
Char", then press {MENU/SET}.
L If required, you can insert
{FLASH}, {REDIAL/PAUSE} or
{*} (TONE) in a phone number.
8
Select "Done", then press
{MENU/SET}.
L To cancel, select "Cancel", then
press {MENU/SET}.
9
Press {REDIAL/PAUSE} to return to
standby mode.
Note:
L To return to the previous menu, press
{<}.