Configuring Ssl Administration - Nortel NN46110-600 User Manual

Vpn router security — servers, authentication, and certificates
Table of Contents

Advertisement

To add a DHCP relay interface:
1
2
3
4
5
To view DHCP Relay statistics:
1
2
The DHCP Relay Statistics window provides the following details:

Configuring SSL administration

The SSL administration feature enables secure management of the VPN Router
over SSL-enabled HTTP (HTTPS) and is used over all tunnel and interface types.
Remote management of a VPN Router requires only an SSL-enabled Web
browser on the administrator's computer, which most operating systems include.
Figure 9
Select Servers > DHCP Relay and click Add.
Select a Physical Interface from the list.
For the state, select either Enabled or Disabled.
For the DHCP Server, enter the IP address and then click Enabled for
Helper 1, Helper 2, and/or Helper 3.
Click OK.
Select DHCP Relay.
Click Statistics.
In—total number of all of the incoming DHCP packets
Out—total number of forwarded DHCP packets
Discarded—total number of incoming packets that were ignored because of
bad content
Relayed To Server—total number of packets forwarded to a DHCP server(s)
Relayed To Client—total number of packets forwarded to DHCP client(s)
is an example of SSL administration.
Nortel VPN Router Security — Servers, Authentication, and Certificates
Chapter 2 Configuring servers 63

Advertisement

Table of Contents
loading

Table of Contents