Configuring Ldap User Encryption Key; Figure 4 Enable 3Des Window - Nortel NN46110-600 User Manual

28 Chapter 2 Configuring servers

Figure 4 Enable 3DES window

2
3
To enable 3DES with the CLI, enter the following command:
ldap-server tripledes-enable

Configuring LDAP user encryption key

With the LDAP user configurable encryption key, you can set your own
user-defined encryption key instead of the default encryption key that is present on
the VPN Router. If you use a user-defined encryption key with an external server,
all the VPN Routers that use that external LDAP server must have the same
configured encryption key..
You can use the GUI or the CLI to configure the LDAP user configurable
encryption key.
To change the existing encryption key:
1
NN46110-600
Click Enable TripleDES.
The 3DES Confirmation window appears. When TripleDES is enabled, all
passwords within the box are encrypted with 3DES as well as any future
passwords that are entered.
To confirm the 3DES encryption, click OK.
Warning: To return to the default encryption key, after you set a
user-defined key, you must reset the VPN Router to factory defaults.
Select Servers > LDAP.