Life Fitness CLUB Series Assembly Instructions Manual page 7

3/8 X 5" 16
3/8 X 2-3/4" 14
FIGURE 4
STEP 4:
• LOOSELY assemble the TOP BOOM (6) to the TOWER (1) using six RH CAPS (36), two 3/8 X 5" BOLTS (16), two 3/8 X 2-3/
4" BOLTS (14), eight 3/8" SAE WASHERS (19), eight 3/8" RH WASHERS (20) and four 3/8" LOW HEIGHT LOCK NUTS (18)
as shown in FIGURE 4.
• LOOSELY assemble the TOP BOOM (6) to the BOOM SUPPORT (5) using eight RH CAPS (36), four 3/8 X 2-3/4" BOLTS (14),
eight 3/8" SAE WASHERS (19), eight 3/8" RH WASHERS (20) and four 3/8" LOW HEIGHT LOCK NUTS (18) as shown in
FIGURE 4.
• Securely tighten all loose frame connections made to this point, then proceed to snap RH CAPS
(36) over the RH WASHERS (20) on all tightened connections.
18
20
19
36
1
6
7
5