Life Fitness CLUB Series Assembly Instructions Manual page 5

FLUSH
3C
FIGURE 2
STEP 2:
• LOOSELY assemble the MAIN UPRIGHT (2) between the RIGHT and LEFT TOWER SUPPORT (3 & 4) using four RH CAPS
(36), two 3/8 X 4" BOLTS (15), four 3/8" SAE WASHERS (19), four 3/8" RH WASHERS (20) and two 3/8" LOW HEIGHT
LOCK NUTS (18) as shown in FIGURE 2.
• Proceed to tighten up the last two connections made, using the following steps:
• Shim up the RIGHT and LEFT TOWER SUPPORTS (3&4) so that they are flush with the PLATES on the TOWER (1)
then SECURELY TIGHTEN. SEE FIGURE 2-B
• Shim up the MAIN UPIRIGHT (2) so that it is flush with the PLATES of the RIGHT and LEFT TOWER SUPPORTS
(3&4) then SECURELY TIGHTEN. SEE FIGURE 2-B
1A
3A
FLUSH
3
3B
4
19
36
15 3/8 X 4"
PLATE
FIGURE 2-B
FLUSH
FLUSH
2D
2C
18
2G
2I
2
20
5
3 X 2" TUBE
2E
2B
2A
2F
2E
2J
2H