Fujitsu ASUH30LPAS Design & Technical Manual page 53

¢ Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
 Function setting list
Function no.
1) 11
2) 30/31
3) 35/36
4) 40
5) 42
6) 44
7) 46
8) 48
9) 49
10) 60
11) 61
12) 62
13) 66
14) 67
15) 71
16) 72
17) 73
18) 95
1) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
11-1. Function settings by using remote controller
Filter sign
Room temperature control for indoor unit sensor
Room temperature control for wired remote controller sensor
Auto restart
Room temperature sensor switching
Remote controller custom code
External input control
Room temperature sensor switching (Aux.)
Indoor unit fan control for energy saving for cooling
Switching functions for external output terminal
Control switching of external heaters
Operating temperature switching of external heaters
Outdoor temperature zone boundary temperature A
Outdoor temperature zone boundary temperature B
Standby time for auxiliary equipment operation
Heat pump backup setting
Emergency heat for external output terminal
Heat insulation condition (building insulation)
Setting value
00
01
02
03
Functions
Setting description
Standard (400 hours)
Long interval (1,000 hours)
Short interval (200 hours)
No indication
- 49 -
Factory setting
♦
11. Function settings