Setting Your Logo - Panasonic KX-FLM551 Operating Instructions Manual

Setup

Setting your logo

The logo can be your company, division or name.
Press p.
1
Display:
Press #, then 02.
2
Press w.
3
Enter your logo, up to 30 characters, using
4
the dial keypad. See the next page for details.
Example: "Bill"
1. Press 2 2 times.
2. Press 4 6 times.
3. Press 5 6 times.
4. Press ) to move the cursor to the next
space and press 5 6 times.
Press w.
5
Press p.
6
Note:
You can enter your logo by rotating
the next page) in step 4. In this case, press
move the cursor.
16
SYSTEM SET UP
YOUR LOGO
LOGO=
LOGO=B
Cursor
LOGO=Bi
LOGO=Bil
LOGO=Bill
SETUP ITEM [
JOG DIAL
For fax advantage assistance, call 1-800-435-7329.
FLASH
(Hyphen)
HANDSET MUTE
(Insert)
To change capital or lower case letters
Pressing the # key will change to capital or
lower case alternatively.
1. Press 2 2 times.
Display:
2. Press 4 3 times.
3. Press #
.
4. Press 5 3 times.
To correct a mistake
]
Press ) or ( to move the cursor to the
incorrect character, and make the correction.
To delete a character
Move the cursor to the character you want to
delete and press {(Delete).
To insert a character
1. Press ) or ( to move the cursor to the
position to the right of where you want to
(see insert the character.
2. Press FG(Insert) to insert a
to
space and enter the character.
Display
MENU
JOG DIAL
STOP
(Delete)
LOGO=B
LOGO=BI
LOGO=Bi
LOGO=Bil
/
SET