Panasonic KX-FLM551 Operating Instructions Manual page 55

Code Feature & Display
Setting the Caller ID list to print
automatically
#26
AUTO CALL. LIST
Setting the Distinctive Ring pattern
#31
RING DETECTION
Receiving other size documents
AUTO REDUCTION
#37
To receive a fax document that is
longer than your recording paper.
Changing the display contrast
#39
LCD CONTRAST
Changing the fax activation code
FAX ACTIVATION
If you use an extension telephone
#41
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 39).
Setting the memory reception
alert
RECEIVE ALERT
#44
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
Setting the Error Correction
Mode (ECM)
ECM SELECTION
#68
To send a fax even if there is static
interference on the telephone line.
Features Summary
Settings
"ON": The unit will print the Caller
ON
ID list automatically after every 30
new calls (p. 24).
OFF
See page 40 for details.
A, B, C, D
OFF
"ON": The unit will fit a received
ON
document onto your recording
paper.
"OFF": The unit will print the
OFF
original size.
"NORMAL": For normal contrast
NORMAL
"DARKER": Used when the display
contrast is too light.
DARKER
1. Follow steps 1–3 on page 54.
2. Rotate
ON /
3. Press
: :
CODE= 9
4. Enter your code from 2 to 4 digits,
using 0–9 and
5. Press
OFF
6. Press
Do not enter "0000".
If you are alerted by a slow
beeping sound, clear the printing
ON
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
OFF
This feature is available when the
transmitting/receiving stations are
ON
ECM compatible.
If there are documents in the
memory, clear them before making
OFF
the setting (p. 36).
(The default setting is in bold type.)
How the unit operates
n
to select "ON".
w
.
:
.
w
.
p
.
55