Receiving Mode - Panasonic KX-FLM551 Operating Instructions Manual

Fax – sending (cont.)
The other party complains that dirty
patterns or black lines appear on their
received document.
The glass or rollers are dirty. Clean them
(p. 69).
I cannot send a fax overseas.
Use the overseas transmission mode of
feature #23 (p. 54).
Add two pauses at the end of the
telephone number or dial manually.
Fax – receiving
I cannot receive documents.
The telephone line cord is connected to
the EXT jack on the unit. Connect to the
LINE jack (p. 14).
When you have a single telephone line
and subscribe to a telephone company's
voice mail service, you must also
subscribe to the Distinctive Ring Service
(p. 40).
I cannot receive documents automatically.
The receiving mode is set to TEL mode.
Set to FAX ONLY mode (p. 37).
The time taken to answer the call is too
long. Decrease the number of rings of
feature #06 (p. 52).
The display shows the following, but faxes
are not received.
CONNECTING.....
The incoming call is not a fax. Change the
receiving mode to TEL mode (p. 36).
A blank sheet is ejected.
The other party placed the document in
their fax machine the wrong way. Check
with the other party.
A white line or a dirty pattern appears on
your recording paper.
The glass or rollers are dirty. Clean them
(p. 69).
(continued)
For fax advantage assistance, call 1-800-435-7329.
Operations
The printing quality is poor.
The other party sent a faint document. Ask
them to send a clearer copy of the
document.
Some paper has instructions
recommending which side to print on. Try
turning the paper over.
You may have used paper with a cotton
and/or fiber content that is over 20%, such
as letterhead or resume paper.
The remaining toner is low. Replace the
toner cartridge (p. 64).
We recommend you replace the drum unit
every third time you replace the toner
cartridge (p. 64). To check the drum life
and quality, please print the printer test list
(p. 71).
The toner save mode of feature #79 is on
(p. 56).
The other party complains that they
cannot send a document.
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper
(p. 13) or clear the jammed paper (p. 66).

Receiving mode

I cannot select the desired receiving mode.
If you want to set FAX ONLY mode:
— press PQ to turn on the
AUTO ANSWER light.
ON
If you want to set TEL mode:
— press PQ to turn off the
AUTO ANSWER light.
OFF
The other party complains that they
cannot send a document.
The unit is not in AUTO ANSWER mode.
Press PQ to turn on the
AUTO ANSWER light.
61