Setting The Stride Length - Omron HJ-720ITC Instruction Manual

SETTING THE STRIDE LENGTH

Setting range: 1'00'' to 4'00'' feet
The stride length flashes on the display.
1.
Press the MEMO/L Button
to advance by increments of 1'' inch.
Press and hold the button to advance the
stride in 4'' inches increments.
NOTE:
Press the MODE/EVENT Button to
return the stride length to 1'08''.
2.
Press the SET Button to set the stride
length.
The number of steps and time will display.
All the settings are completed.
To change the time, weight, or stride length after the setting
is completed:
1.
Press and hold the SET Button for 2 seconds.
2.
Change the setting.
NOTE:
If the setting does not need to be changed, press the set button
to advance to the next setting.
15