Setting The Stride Length - Omron HJ-112 Instruction Manual

SETTIING THE STRIDE LENGTH
Setting range: 1'00'' to 4'00'' feet
Stride display blinking.
1.
Press the MEMORY/L button
to adjust the stride length.
Each time you press the button, the stride
length will advance by 1'' in.
When the display reaches 4'00'' it will return
to 1'00''.
Press and hold the button to advance the
stride in 1' increments.
NOTE:
Press and hold the RESET button to return
the stide length to 1'08''.
2.
Press the SET button to the stride length.
The stride length is set
The number of steps and time will display.
All the settings are finished.
To change the time, weight, or stride distance after
the setting is completed:
1.
Press and hold the SET Button for 2 seconds.
2.
Change the setting.
NOTE: If setting does not need to be changed, press the set button to
advance to the next setting.
14
The initial stride
length is set to 1'08''.
During the stride
length setting,
the displayed
figures will blink.
Example: To set the
stride length to 1'10''
to 1'10''
During the stride
length
setting, the
displayed figures
will blink.