Before Using The Machine; Part Names And Functions - Olivetti d-Copia 16W Operation Manual

1
Chapter 1

BEFORE USING THE MACHINE

This chapter contains basic information that should be read before using the machine.

PART NAMES AND FUNCTIONS

15
16
14
Document feeder cover (when the SPF is installed)
1
/document cover
Open to make copies from the document glass.
(p.18)
Document glass
2
Place an original that you wish to scan face down
here. (p.18)
Handles
3
Use to move the machine.
Power switch
4
Press to turn the machine power on and off. (p.12)
Operation panel
5
Contains operation keys and indicator lights. (p.10)
Paper output tray
6
Copies and prints are deposited to this tray.
Front cover
7
Open to remove paper misfeeds and perform
machine maintenance. (p.50, p.54)
8
1
2
3
4
1
6
5
7
8
Paper trays
8
Each tray holds 250 sheets of paper. (p.14)
Side cover
9
Open to remove paper misfeeds and perform
machine maintenance. (p.48, p.57)
Side cover handle
10
Pull to open the side cover. (p.48)
Bypass tray guides
11
Adjust to the width of the paper. (p.15)
Bypass tray
12
Paper including special paper (such as transparency
film) can be fed from the bypass tray. (p.15, p.26)
Bypass tray extension
13
Pull out when feeding large paper such as B4 and
A3 (8-1/2" x 14" and 11" x 17"). (p.15)
Charger cleaner
14
Use to clean the transfer charger. (p.57)
USB 1.1 connector
15
Connect to your computer to use the printer
functions. (Software Setup Guide)
3
9
10
11 12 13