Hilti NURON TE 2-22 Original Operating Instructions page 13

hat and ear protection while the product is in use. In addition, wear light
respiratory protection if you are not using a dust extractor.
▶ Apply appropriate safety measures at the opposite side of the workpiece
in work that involves breaking through. Parts breaking away could fall
out and / or fall down causing injury to other persons.
▶ When chiseling into ceilings, walls and floors, always make sure that you
have a safe and firm stance. A sudden break-through can affect your
balance.
▶ Do not touch rotating parts – risk of injury!
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked
air vents!
▶ Switch the product on only after you have brought it to the working
position.
▶ Do not work in an environment heavily contaminated with dust.
▶ Dust produced by grinding, sanding, cutting and drilling can contain
dangerous chemicals. Some examples are: lead or lead-based paints;
brick, concrete and other masonry products, natural stone and other
products containing silicates; certain types of wood, such as oak,
beech and chemically treated wood; asbestos or materials that contain
asbestos. Determine the exposure of the operator and bystanders
by means of the hazard classification of the materials to be worked.
Implement the necessary measures to restrict exposure to a safe level,
for example by the use of a dust collection system or by the wearing
of suitable respiratory protection. The general measures for reducing
exposure include:
▶ working in an area that is well ventilated,
▶ avoidance of prolonged contact with dust,
▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin
with water and soap.
▶ Take frequent breaks and do physical exercises to improve the blood
circulation in your fingers. High vibration during long periods of work can
lead to disorders of the blood vessels and nervous system in the fingers,
hands and wrists.
▶ Do not look directly into the light source (LEDs) of the power tool and
do not aim the beam at other persons' faces. Risk of dazzling or eye
damage.
▶ Prevent ingress of moisture. A short circuit caused by moisture can
result in fire or burn injuries.
▶ Risk of injury by falling tools and/or accessories. Before starting work,
check that the battery and installed accessories are secure.
▶ Do not attach a belt hook to this product.
*2343729*
2343729 English 7