Page 1
TE 2 / TE 2-S / TE 2-M Bedienungsanleitung Operating instructions Mode d’emploi Istruzioni d’uso Manual de instrucciones Manual de instruções Gebruiksaanwijzing Οδηγιες χρησεως Használati utasítás Instrukcja obsługi Инструкция по зксплуатации Návod k obsluze Návod na obsluhu Upute za uporabu Navodila za uporabo Kullan›m k›lavuzu...
Page 2
TE2-M TE 2 / TE 2-E TE 2-S TE 2-S TE2-M Printed: 14.02.2014 | Doc-Nr: PUB / 5170540 / 000 / 00...
Warning signs Operating controls Chuck release ring (TE 2-M) Function selector switch Control switch General Warning: Warning: hot Forwards / reverse switch (TE 2 / TE 2-S / TE 2-M) warning electricity surface Lockbutton Obligation signs Component parts Dust shield...
– The tool is intended for professional use.The tool may be operated, serviced and repaired only by The TE 2 / TE 2-E / TE 2-S / TE 2-M is an electrically pow- authorized, trained personnel. This personnel must ered rotary hammer with pneumatic hammering mech- be informed of any special hazards that may be anism designed for professional use.
Safety rules c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source 1. General power tool safety warnings and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch WARNING! Read all safety warnings and all or energising power tools that have the switch on instructions.
Page 10
Dirty or dusty electric tools should thus be checked a “live” wire will make exposed metal parts of the tool at a Hilti service center at regular intervals, espe- “live” and shock the operator. cially if used frequently for working on conductive h) Children must be instructed not to play with the tool.
Failure to observe this point may Drilling result in reduced performance of the tool and overheating Hammer drilling (TE 2 / TE 2-E / TE 2-S / TE 2-M) / of the cord. Damaged extension cords must be replaced. precision hammering action (TE 2-S) Use only insert tools with TE-C connection end.
TE-C interchangeable chuck or quick-release inter- changeable chuck may be fitted to the TE 2-M with chuck Dust removal (TE DRS-S) A DRS extraction head can be attached to the side han- interface dle / depth gauge.
Return waste material for recycling Most of the materials from which Hilti power tools are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old electric tools for recycling.
EC declaration of conformity (original) Technical documentation filed at: Hilti Entwicklungsgesellschaft mbH Description: Rotary Hammer Zulassung Elektrowerkzeuge Designation: TE2 / TE 2-E / TE2-S / TE2-M Hiltistrasse 6 Year of design: 2005 86916 Kaufering Deutschland We declare, under our sole responsibility, that this product...