Install Output Trays - AGFA DRY 3.4 User Manual

B
9

Install output trays

1
Put tray support block into place.
1. Put tray support block into place.
B
9
1
Put tray support block into place.
2
Install lower output tray.
2. Install lower output tray.
2
Install lower output tray.
3
Repeat step 2 for 3 other trays.
4
Use support block(s) if tray(s) not
installed.
3
Repeat step 2 for 3 other trays.
3. Repeat step 2 for 3 other trays.
4
Use support block(s) if tray(s) not
installed.
5
Put an empty label on each output tray.
12/20
Install output trays
Install output trays
T1
T4
T1
T4
DRY 3.4 | Plug & Play Installation Manual | 155
2
Install lower output tray.
2
Install lower output tray.
3
Repeat step 2 for 3 other trays.
3
Repeat step 2 for 3 other trays.
5
Put an empty label on each output tray.
T1
T2
T3
T4
5
Put an empty label on each output tray.
T1
T2
T3
T4
2903S EN 20121207
2602A EN 20191018 0826
T1
T2
T3
T4
T1
T2
T3
T4