Cleaning The Cooling Air Flow Holes - AGFA DRY 3.4 User Manual

Cleaning the cooling air flow holes

1. Switch off the printer.
2. Remove the power plug from the socket.
3. Remove the network cable.
4. With a vacuum cleaner, clean the cooling air flow holes (item 1 and 2 on
the drawing below) , especially the CPU/power supply area (item 1).
5. Plug in the printer and switch it on.
Related Links
Switching off the printer
Switching on the printer
DRY 3.4 | Preventive maintenance and replacements | 119
on page 69
on page 66
2602A EN 20191018 0826