Mount Drum Belt - AGFA DRY 3.4 User Manual

8

Mount Drum belt

1
Take drum belt from accessories box.
1. Take drum belt from accessories box.
8
1
Take drum belt from accessories box.
2
Open drum compartment door.
2. Open drum compartment door.
3
Push drum belt tensioner down and
hold it.
2
Open drum compartment door.
3
Push drum belt tensioner down and
hold it.
3. Push drum belt tensioner down and hold it.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
5
Close drum compartment door.
4
Mount drum flat belt with the text head
4. Mount drum flat belt with the text head up on the inner side. Gently
up on the inner side. Gently release belt
release belt tensioner.
tensioner.
5
Close drum compartment door.
2903S EN 20121207 2903S EN 20121207
If the printer is not used for a long time
it is recommended to remove the belt.
Mount Drum belt
Mount Drum belt
0
0
(at least 4 weeks),
DRY 3.4 | Plug & Play Installation Manual | 153
2
Open drum compartment door.
B
2
Open drum compartment door.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
B tensioner.
4
Mount drum flat belt with the text head
up on the inner side. Gently release belt
tensioner.
If the printer is not used for a long time
it is recommended to remove the belt.
If the printer is not used for a long time
it is recommended to remove the belt.
0
0
(at least 4 weeks),
(at least 4 weeks),
2602A EN 20191018 0826
11/