Table of Contents
Advertisement
2-4-4. FP-104 Board
2-4-4. FP-104 Board
Replacement
Removal
1. Turn off the power and wait for more than 30
seconds.
2. Remove the front panel.
(Refer to Section 1-6.)
3. Unscrew the one stepped screw.
4. Remove the FP-104 board from the retainer
of the front chassis.
5. Disconnect the harness from the connector.
6. Unscrew the two screws on B side of the FP-
104 board and remove the lens holder.
2-34 (E)
FP-104 board
Connector
Stepped screw
Harness
FP-104 board
Retainer
Screws
Lens holder
BKNW-116
Advertisement
Table of Contents
