Table of Contents
Advertisement
2-4-3. CN-1667/1668 Boards
Installation
CN-1668 board
. . . . . In the case of CN-1667 board
Install in reverse order from steps 2 to 5 of
B-side
removal procedure.
. . . . . In the case of CN-1668 board
Install in reverse order from steps 2 to 7 of
removal procedure. However, when connecting
the CN-1668 board, align to pin 1 side of each
connector.
n
When fixing the harness with new tape, use the
following tape with cutting it in 2.5 cm.
Pin 1 side of J2 connector
Scotch electrical tape, flame-resistant film No.10
(or equivalent)
2-33 (E)
BKNW-116
Advertisement
Table of Contents
