2. Attach the SE-378 board and HDD bracket in
reverse order from steps 6 to 9 of removal
procedure.
3. Solder the SE harness which was unsoldered
in removal step 5 on SE-378 board.
4. Connect the harnesses which was disconnect-
ed in removal step 4 to the connectors. (Three
portions)
5. Install the HDD unit referring to "Installa-
tion" in Section 2-2-2.
BKNW-116
Stepped screws
Stepped screws
SE-378 board
HDD unit
Connector
2-4-2. SE-378 Board
HDD bracket
SE harness
Black
Connector
Red
Solder
Clampers
Connector
2-31 (E)