Thm R Board (R-Ch) - Sony WH-1000XM4 Service Manual

WH-1000XM4
2-7.

THM R BOARD (R-ch)

Note: When removing the cushion (BATT) from the lithium
ion storage battery, be careful so that the lithium ion
storage battery is never damaged.
1 cushion (BATT)
(See Note)
– R-ch –
THM R board
2 Lift up the THM R board in
the direction of the arrow.
< Fig. A >
Attach in order from 1 to 3.
2 Make sure there is
slack on the THM
R board.
OK
Slack.
THM R board
30
4 THM R board
(See Fig. A, U)
terminal side
lithium ion storage battery
< Fig. U >
When removing the THM R board, firmly hold
down the connector, and slowly pull out the
THM R board straight up so that the connector
does not get damaged.
guide line
(center of circle)
circle
1 Align the chip part
of THM R board in
the guide line.
NG
No slack.
THM R board
How to install the THM R board
Insert the THM R board straight into the interior.
There is a possibility that using this unit without
the THM R board correctly installed will damage it.
OK
connector
THM R board
lithium ion
storage battery
THM R board
3 Affix the cushion (BATT).
Sony CONFIDENTIAL
For Authorized Servicer
NG
Shallow.
THM R THM R
board board
connector
3 Draw the THM R board out of
the connector in SUB R board
in the direction of the arrow.
SUB R board
guide line
10 ± 2 mm
SYS SET