Mitsubishi LT-2220 Owner's Manual page 47

(Figure 34)
The timer will automatically turn the TV on (if it is
off) at the time you schedule and select. When ANT
is the selected input, you may select any memorized
channel. The TV will tune to this channel when the
timer turns it on.
The TV's clock must be set before you can set the
timer. If you have not set the clock and/or day, you
will see the CLOCK menu instead of the Timer
menu.
(Figure 35)
The timer can be turned On or Off. When On, you
need to select the time and the day to turn On and
the input and channel to display. At your preselected
time, the timer will turn the TV on and a message
will be displayed, "Press a key for the TV to stay on."
Any button on the remote control must be pressed
within  minutes or the TV will turn itself off.
(Figure 36)
Select the hour and minute, including AM or PM,
when the TV is to turn on.
Press or to slowly adjust the time. Press and
hold or to quickly adjust the time.
Figure 34. ADVANCED FEATURES menu
Figure 35. TIMER menu (Timer)
Figure 36. TIMER menu (Set Time)
47