Mitsubishi LT-2220 Owner's Manual page 14

Note: The TV side panel and connections shown here are for reference only and may vary by model.
UHF Antenna
VHF Antenna
(Channels 14-69)
(Channels 2-13)
Flat Twin Lead
Flat Twin Lead
External
Antenna
or Cable
300 Ohm to
75 Ohm
Combiner
UHF
VHF
Back
1
Figure 1. Connecting separate UHF and VHF
antennas.
See page 5 for Outdoor Antenna Grounding
300 Ohm Flat
75 Ohm
Twin Lead
Coaxial Cable
1
Optional 300 Ohm to 75 Ohm
Matching Transformer
Figure 2. Connecting twin lead antenna, coaxial lead
antenna, or wall outlet cable.
See page 5 for Outdoor Antenna Grounding
14
TV side panel - right
2
Side
Additional connection cables are not provided
with the TV. They should be available at
most electronic stores.
TV side panel - right
3
2
(Figure 1)
Connect the UHF and VHF antenna leads to the
1.
UHF/VHF combiner.
2. Push the combiner onto ANT on the TV side
panel.
UHF/VHF combiners are not provided with
the TV. They are available at most electronic stores.
Note: This TV will only be able to provide an analog
signal through ANT on the TV side panel.
(Figure 2)
1. Connect the 300ohm twin leads to the transformer.
2. Push the 75ohm side of the transformer onto
ANT on the TV side panel.
300ohm to 75ohm matching transformers are not provided
with the TV. They are available at most electronic stores.
3. Connect the incoming cable to ANT on the TV
side panel.
Note: This TV will only be able to provide an analog
signal through ANT on the TV side panel.