Mitsubishi LT-2220 Owner's Manual page 15

Note: The TV side panel and connections shown here are for reference only and may vary by model.
TV side panel (section detail)
2
Incoming Cable
1 2
OUT
IN
Figure 3. Connecting the cable box.
Note: See page 5 for Outdoor Antenna grounding.
2
Incoming Cable
1
IN
Antenna
2
OUT
Figure 4. Connecting the VCR with antennas or wall
outlet cable.
If you have a digital cable box, refer to your
Digital Cable Box owner's guide for instructions on
optimal connections to this TV.
Cable Box back panel
(section detail)
TV side panel (section detail)
VCR back panel (section detail)
AUDIO OUT AUDIO IN VIDEO OUT
L L (Y/C)
1
1 2
MONITOR
R R
(Figure 3)
1. Connect the incoming cable to ANT on the
TV side panel.
NOTE: If your cable box has separate audio/video
outputs, please see Composite Video with
Audio or S-Video with Audio, page 16
(Figure 6).
(Figure 4)
Connect the incoming cable to ANT on the TV
1.
side panel.
NOTE: If your cable box has separate audio/video
outputs, please see Composite Video with
Audio or S-Video with Audio, page 16
(Figure 6).
15