Mitsubishi LT-2220 Owner's Manual page 42

Figure 25. SQV (Super Quick View™)
2
3
1
4 5 6
7 8 9
0
SQV QV
Figure 26. SQV (Super Quick View™) button on the remote control
(Figure 26)
1. Use the CH (channel) or number buttons to select the channel you want to add.
2. Press and hold the SQV button for about 3 seconds. When "SQV" and the memory bank number appear
under the channel number, the channel has successfully been added.
1. Press the SQV button.
2. To change memory banks, press a number button within 5 seconds of pressing the SQV button.
1. Press the SQV button repeatedly until you see the desired channel.
2. While the channel number and SQV indicator are still displayed on the screen, press the CANCEL button. If
the CANCEL button is not pressed before the SQV indicator disappears, the channel will not be removed.
3. When the SQV indicator disappears, the channel has successfully been removed.
42
(Figure 25)
Put together a list of your favorite channels from
ANT using SQV (Super Quick View). Store up
to  channels in each of the  different memory
banks. After adding a channel to the SQV
memory, "SQV" will appear under the channel
number on the TV screen.
1. Press or when at Channel settings or use the
CHANNEL button on the remote control to select
the channel you wish to add or delete from a SQV
memory bank.
2. Press when at SQV in the menu to move the
selector to the On/Off setting.
3. Press or when at SQV setting to select the
SQV memory bank you wish to modify.
4. Press ENT to add (On) or delete (Off) the current
channel from the SQV memory bank that you
have selected.