3.0 Installation
Replace the auto iris lens connection plug cover and take off the Sensor protection cap.
Then, attach the auto iris lens to the camera by screwing it in clockwise.
Insert the connection plug that is connected to the auto iris lens cable into the auto iris lens
connector, located on the side of the camera.
NOTE:
Use only lenses within the specifications shown below.
Otherwise, lenses may damage the camera or abnormal fixing may result.
Installation of C-Mount Lenses
CS-MOUNT AD APTOR RING
C-MOUNT ADAPTOR RING
7
C-mount lens : 10 mm or less
CS-mount lens : 5 mm or less
CS-MOUNT AD APTOR RING
Installation of CS-Mount Lens