REPAIR
DISASSEMBLY/ASSEMBLY
DISASSEMBLY
To disassemble the unit for servicing, perform the following procedure step by step, in sequence using the
illustrations as a guide. The procedure directs the technician to remove the power source from the chassis.
POTENTIAL SHOCK HAZARD The following procedures are to be
performed by qualified service personnel only. Removal of the Power
Source panels exposes line voltage parts. Service personnel must insure
that the AC Power Cord is disconnected prior to disassembly.
1. Place the unit on a suitable work surface. Insure that the Power Cord has been disconnected from the
back of the power source.
32
WARNING