Table of Contents
Advertisement
GENERAL INFORMATION
THERMAL MANAGEMENT CENTER
Refer to the illustration following for location of parts.
20. CH 1 POWER RECEPTACLE - Provides power, tip ground, sensing circuitry and finger switch
connection from PRC 2000 system to handpiece connected to Channel 1 (CH 1).
21. CH 2 POWER RECEPTACLE - Provides power, tip ground, sensing circuitry and finger switch
connection from PRC 2000 system to handpiece connected to Channel 2 (CH 2).
22. CH 3 POWER RECEPTACLE - Provides power, tip ground, sensing circuitry and finger switch
connection from PRC 2000 system to handpiece connected to Channel 3 (CH 3).
23. SNAP-VAC PORT - Quick connect fitting which provides quick-rise vacuum for Sodr-X-Tractor or
ThermoPik handpieces.
24. CONTROLLABLE PRESSURE PORT - Quick connect fitting with adjustable valve which
provides variable air flow for Mini ThermoJet handpiece and Sodr-X-Tractor handpiece (in Hot Jet
Mode).
25. DIGITAL READOUT - Provides a three digit display of the Current Channel (channel with
illuminated LED; CH 1, CH 2, CH 3 or AUX 1, AUX 2, AUX 3) temperature information. This
includes: Operating Tip Temperature in Temperature Display Mode (normal operation), Tip
Temperature Offset Constant in TIP OFFSET Mode, Set Tip Temperature in TIP SET Mode, and
other information in Calibration (CAL) Mode.
26. °F/°C KEY - Selects °F or °C display of Set and Operating Temperatures and Tip Temperature Offset
Constants.
27. °F LED - Illuminates when Set and Operating Tip Temperatures and Tip Temperature Offset Constants
are displayed in °F.
28. °C LED - Illuminates when Set and Operating Tip Temperatures and Tip Temperature Offset
Constants are displayed in °C.
29. CH 1 LED - Illuminates when Channel 1 (CH 1) or Auxiliary Channel (AUX 1) is the Current
Channel (i.e., the channel (with connected handpiece/tip or auxiliary accessory) whose temperature
information is displayed on the Digital Readout).
10
Advertisement
Table of Contents
