Zeroing The Scale - Pitney Bowes SendPro C Auto Operator's Manual

3. Make sure that the seal/no seal lever is set to the seal position (all the way to the left).
4. Place the envelopes on the feed deck. Tap Start on the Envelope Printing or Print on Envelopes
screen.
If the moistener tank is full and your envelopes do not seal correctly, clean or replace the moistener
brush and wick.

Zeroing the scale

Zero the scale to set the weight to zero.
Make sure there is nothing on the scale when you zero it.
Pitney Bowes Operator Guide April 2022
Printing on envelopes
136