Printing Postage On Tapes - Pitney Bowes SendPro C Auto Operator's Manual

Printing on envelopes
1. Tap the weight to view the weighing options. You can enter the weight manually or use a scale.
2. View the balance of funds you have remaining in your device.
3. Tap the date to view the date options.
4. View the total postage amount.
5. Preview or add graphics.
6. Tap Start to begin feeding and printing postage on the envelopes loaded on the feed deck. The
Start button is only present on SendPro C models equipped with an automatic feeder.
7. Tap Tape to begin printing postage on tape. To print more than one tape, tap the number next to
Tape and enter the number of tapes. Tape is only present on SendPro C models equipped with
an automatic feeder.
8. Tap Class to view the class and any extra services.
9. Tap Print Mode to access the Print Mode screen. This provides you with different printing
modes such as adding graphics to your envelope, adding more postage, or making corrections
to the date. You can also choose to seal envelopes without printing postage.
Related topics

Printing postage on tapes

If it is not possible to print postage directly onto your envelope, you can print it onto a tape. You can
then apply the tape to the envelope.
1. Push the tape lever to the right and hold it there (a). Drop a stack of strip tapes down into the slot
(b). Make sure that the printable side faces to the right (toward the touchscreen).
2. Tap Envelope Printing or Print on Envelopes on the Home screen.
3. Select the postage mode and settings (account, class and special service, weight).
Pitney Bowes Operator Guide April 2022 119