FujiFilm Apeos C7070 Reference Manual page 48

Error Code
710
711
801, 802
1002, 3061
3060, 3065
3062
3063
3064
Updatings for Add-on Application Trouble
Message
Unable to connect to
server
Check network settings
Some services cannot be
connected
Check your network
settings, proxy settings,
and filtering software
settings.
Service is not available.
Please wait for a while and
try again
An error has occurred
Download failed
Please try again.
If the symptom does not
change, try power off and
power on.
Cannot be installed on this
model
Cannot be installed
(invalid version)
A version inconsistency
has occurred
48
2 Appendix
Request to your system administrator to check the authentication
settings.
Change the user ID.
Contact your local representative.
Log out with the Log In/Out button and try again.
Wait for a while, and then try again.
Log out, hold up the Smart Card, and launch the Smart Card
Registration.
Ensure that the multifunction device is not running a job or an interrupt
is not outstanding, and try again.
Log in as the system administrator and start the Smart Card
Registration again.
A communication error occurred when connecting to the server using
the Internet.
Check the following items.
LAN cable connection

DNS server address settings

Default gateway settings

Subnet mask settings

Proxy server settings

Also, if connection is blocked by any filtering software, unblock the
software.
If the status does not improve after checking the above settings, there
is a possibility of a network failure, or a proxy server setting change or
failure. Please consult your network administrator.
Please wait for a while and try again.
Restart and then try again
The corresponding add-on application cannot be installed.
The corresponding add-on application cannot be updated.
An inconsistency occurred with a module shared by two or more add-
on applications.
Updating of an add-on application that the software attempted to or
update is not possible.
Remedy
Measure