FujiFilm Apeos C7070 Reference Manual page 36

Symptom
White patches appear on
output.
Images are partially
blanked-out.
Toner is scattered around
images.
Images are bluish.
Text is smeared.
Text is garbled.
Printed output is not the
same as the original data
displayed on the screen.
Images are skewed.
36
2 Appendix
Change the paper type setting and try printing again.
Adjust the image transfer in
Quality] > [Adjust Image Transfer] > [Enter Sample Number and
Adjust]. If white patches appear, or output or images are partially
blanked-out, lower the image transfer vale.
If toner is scattered, raise the image transfer vale.
The paper is not appropriate for the machine. Load appropriate paper.
The paper is damp. Replace the paper.
The machine is set to substitute TrueType fonts with the printer fonts.
Set the printing method of TrueType fonts to [Always Use TrueType
Fonts] under [Specify Font] on the [Advanced] tab of your printer
driver.
The paper guides are not adjusted to the correct positions. Adjust the
paper guides to the correct positions.
Cause/Remedy
> [Device] > [Maintenance] > [Image